Post by NPAudio on Mar 9, 2023 23:07:43 GMT
These are pictures from the internet: some componets are different to the one I have in for modding.
This is with batteries removed, but before any components removed.
You will notice it has 3 small yellow AVX Tantalums instead of the 3 small black PosCaps like on the internet pictures above.
Also the 2 larger black PosCaps are 100uf and not 330uf like on the internet pictures above.
The 3 smaller AVX replaced with Kemwt
The 2 large Poscaps and 10 x AVX removed.
Kemets installed
1st of the OPA2134 opamp removed
Both Muses8920 opamps installed
Removed
Installed
The 2 large Poscaps and 10 x AVX removed.
Kemets installed
1st of the OPA2134 opamp removed
Both Muses8920 opamps installed
Removed
2 x OPA2134 opamps
12 x AVX Tantalum (Polymer?)
2 x Panasonic PosCaps
Dried up thermal paste from all heatsink locations
Vibrator removed - I noticed the audio circuit picked up some slight interference around 350hz on the oscilloscope.
2 x batteries (parallel)
2 x batteries (parallel)
Installed
2 x Muses8920 opamps
14 x Kemet KO Tantalum Polymer ultra low ESR 15 mΩ
Artic MX-4 thermal paste from all heatsink locations
...awaiting 2 x new batteries to arrive.
...awaiting 2 x new batteries to arrive.
