|
|
Post by NPAudio on Mar 15, 2022 11:57:49 GMT
Built in Payload Dumper  and partition flashing all in one GUI - (not SOC dependant) Should cover new coming devices like Cayin N8ii, tested working on Shanling M9, FiiO M17 and M11 Plus
github.com/libxzr/FastbootEnhanceAttachments:
|
|
|
|
Post by whitigir on Mar 16, 2022 13:53:12 GMT
Lovely!!! Will it cover the new Walkman M2 ?
|
|
|
|
Post by NPAudio on Mar 16, 2022 15:12:27 GMT
Lovely!!! Will it cover the new Walkman M2 ? I've never even seen an Android Sony never mind tried to root one 🤔 I suspect they will have a locked bootloader etc so guessing not. |
|
|
|
Post by whitigir on Mar 16, 2022 20:01:18 GMT
So in order for it to read, you need to boot into fast boot boot loader mode ? But when running the program, it shows nothing?
|
|
|
|
Post by NPAudio on Mar 16, 2022 20:29:59 GMT
So in order for it to read, you need to boot into fast boot boot loader mode ? But when running the program, it shows nothing? Yes fastboot mode, are your fastboot drivers installed in windows and does your normal fastboot command line work ? |
|
|
|
Post by rlw6534 on Mar 16, 2022 20:49:19 GMT
Are you actually flashing with this tool? Or just using it to extract boot from payload.bin and then flashing from command line? It's not obvious from the screenshots here or at XDA. I assume this tool is for dynamic partitions only?
|
|
|
|
Post by NPAudio on Mar 16, 2022 22:11:32 GMT
Are you actually flashing with this tool? Or just using it to extract boot from payload.bin and then flashing from command line? It's not obvious from the screenshots here or at XDA. I assume this tool is for dynamic partitions only? Flashing too buddy (The device will need to support the fastboot commands it uses) I've only tried one DAP so far, Shanling M9 Its really just a gui to fastboot commands but makes it super simple and the payload dumper gui is an added bonus.
It will show you the active slot A or B (you can also toggle the active slot)
It will read the partitions in so just click BOOT_A or BOOT_B and select your magisk patched boot.img and your done.
From downloading this to having a rooted M9 was under 10 mins.
I'll post some screen shots next week, got deadlines to hit on mods 😳
|
|
|
|
Post by whitigir on Mar 16, 2022 22:56:11 GMT
So in order for it to read, you need to boot into fast boot boot loader mode ? But when running the program, it shows nothing? Yes fastboot mode, are your fastboot drivers installed in windows and does your normal fastboot command line work ? Ah, you meant I should have this program inside the platform tool folder |
|
|
|
Post by rlw6534 on Mar 17, 2022 0:47:21 GMT
It's nice to see some traction on rooting DAPs. Things like system-wide PEQ are lacking on so many devices regardless of cost. It seems so fundamental but yet it's impossible to find, at least on Android. I now have multiple rooted DAPs and the two FiiO models now have system-wide EQ with high resolution. Now if could just get the Hiby models to correctly work with PEQ and high-res... I'm also using ACCA for much better battery control and hopefully lifespan. Thanks for the support and the forum! |
|
|
|
Post by NPAudio on Mar 17, 2022 7:54:10 GMT
It's nice to see some traction on rooting DAPs. Things like system-wide PEQ are lacking on so many devices regardless of cost. It seems so fundamental but yet it's impossible to find, at least on Android. I now have multiple rooted DAPs and the two FiiO models now have system-wide EQ with high resolution. Now if could just get the Hiby models to correctly work with PEQ and high-res... I'm also using ACCA for much better battery control and hopefully lifespan. Thanks for the support and the forum! You too buddy, yes system wide PEQ is sadly lacking from them all 🤔 even more bizzare is Hiby have system wide MSEB already so imagine it wouldn't take much to make it a proper PEQ compared to other companies starting from scratch. It be a huge advantage for whoever is first. I see so many people asking for it. |
|
|
|
Post by whitigir on Mar 20, 2022 12:40:13 GMT
I am trying to run this and it only run on Dx300, not the N8ii. When checked in ADB devices, the list is “?”
|
|
|
|
Post by NPAudio on Apr 15, 2022 11:58:09 GMT
Update, tested working on Shanling M9, FiiO M17 and M11 Plus
|
|
|
|
Post by amereperson on Apr 22, 2022 0:38:06 GMT
I'm on a FiiO M11 Plus ESS and I'm running into the same problem that whitigir is experiencing, where nothing shows up in fastboot devices. It looks like there needs to be a driver installed for Windows to register the device but it's not showing up for me.
|
|
|
|
Post by rlw6534 on Apr 22, 2022 0:48:31 GMT
I rooted my M11 Plus ESS with QFIL alone (read boot_a and boot_b with QFIL, patched with Magisk app and flashed back with QFIL). Never used fastboot at all. I did use "adb reboot edl" to get into 9008 mode.
|
|
|
|
Post by NPAudio on Apr 22, 2022 6:46:33 GMT
I'm on a FiiO M11 Plus ESS and I'm running into the same problem that whitigir is experiencing, where nothing shows up in fastboot devices. It looks like there needs to be a driver installed for Windows to register the device but it's not showing up for me. You need to disable driver signing in windows. You will need the qualcomm drivers installing. You need to change the detected or undected device in device manager to Android Boot Loader device (when in fastboot mode) Just google those. |
|
and partition flashing all in one GUI - (not SOC dependant)
